|
Gas in the furnace is burnt continuously during all cold season. At
fall and rise in temperature of external air furnaces regulate by changes of the
expense of gas for what on bringing in a gas pipeline establish a regulator, or
manually - the crane on a torch. The regulator consists of the cylindrical case
in which the cylinder filled with kerosene, with soldered in in it Silfon is located.
It has in which will screw the valve. Gas arrives from a gas pipeline in a regulator
through the channel in a head and an aperture in a valve saddle. file recovery program mac . ultrasound tech schools in california . u want to know some more about car buying tips so u may
 With air
rise in temperature indoors kerosene in a cylinder extends and compresses. Connected
to a bottom ñèëüôîíà ïîëçóí moves upwards, and the valve screwed in it closes
the central aperture in a saddle. Thus through a small lateral aperture receipt
of gas and the quantity necessary for steady burning proceeds. At temperature
fall indoors the kerosene volume decreases, silfon the valve is compressed also
opens the central exhaust outlet in a saddle. The gas expense increases, and after
a while the temperature indoors increases. A regulator on necessary temperature
adjust the special screw.
At manual adjustment if on three tubes will reach the minimum expense of
gas, and furnaces more demanded on external temperature, it is necessary to disconnect
two lateral tubes of a torch ã to leave burning only average.
ÀÊÕ offers new updating of this torch on maximum (4380 kcal/ch) and minimum
(350 kcal/ch) heatproduvicity. The torch differs from described by that consists
of five, instead of three tubes. Lateral tubes are coupled at the basis, therefore
the collector knot is not changed. In each of five tubes it is drilled on 44 apertures
in diameter of 1,0 mm. The distance between them should be 8 mm.
|
